Swing stopper closing machine

All elements of the machine are made of stainless steel (1.4301) or of plastic with the best storage capabilities. Impurities or contamination can be rinsed off with hot water (up to 90°C). The moisture occurring in the process has the effect of lubrication at the time of putting the machine into operation. Design "BRACE" The main conveyance star wheel executed in the "BRACE Design" prevents liquid residues from collecting and remaining behind Mechanical "ARCH" (Bow)
The machine table is built in a special bow shape so that liquid residues drain off automatically. A high standard of hygiene is achieved in this manner. Other benefits: - All assemblies below the machine table are
easily accessible - Ease of cleaning the floor below the machine A simple change of modular components The process components on the machine are modular. They are fixed to the system with clamping levers and can be interchanged to suit various bottle sizes. This facilitates quick and accurate replacement of process parts. In case of multiple bottle types, the clamping levers are clearly identified using a colour coordinated system to prevent incorrect mounting. Simple height adjustment The height of the closing elements can be adjusted with the help of a hand wheel. As a result, the time for setting after changing the format is kept as low as possible. During the closing process, the Swing Stopper Head is centred in the middle of the Swing Stopper Clip. This is why it is ensured that the Swing Stoppers are not shifted. Swing stopper tensioning check (Swing stopper opening pressure check) The swing stopper tensioning check identifies swing stoppers whose tensioning force is too low (opening pressure can be controlled), closed bottles with improper tilting point and closed bottles without the seal Safety barrier The system is fitted as standard with a transparent safety barrier made of single-pane safety glass (SSG) in accordance with DIN 12150-1. Reducing noise em