This page is fully or partially automatically translated.

ENZYBREW 10

by Hopfen und mehr GmbH

Logo of Malzmühle MattMill Master

Key Facts

  • Professional multi-enzymatic cleaning agent
  • especially for the daily cleaning of home breweries
  • Biodegradable > 98 % in 28 days

Categories

  • Process and auxiliary materials

Key Facts

  • Professional multi-enzymatic cleaning agent
  • especially for the daily cleaning of home breweries
  • Biodegradable > 98 % in 28 days

Categories

  • Process and auxiliary materials
Show More

PRODUCT DESCRIPTION

Enzymatic cleaning agent for breweries Professional multi-enzymatic cleaning agent, especially suitable for the daily cleaning of the equipment of home breweries. ENZYBREW 10 removes all typical organic impurities, as they occur in the brewing process (e.g. hop residues, starch, sugar couleur, etc.) It is ideally suited for cleaning mash and wort kettles, wort coolers, filter plates as well as fermentation, storage and pressure tanks. Without the addition of phosphorus, ENZYBREW 10 offers a thorough and safe cleaning of brewing equipment. It is neutral to sealing materials, e.g. Teflon seals. Advantages: Better hygiene: Effectively prepares for disinfection prior to cleaning in one cycle (time saving, water saving) Very good rinsing capability No danger to the user: Non-corrosive product (no risk of burns) Environmentally friendly alternative to caustic soda Biodegradable > 98% in 28 days Applications Suitable for: Mash wort kettles, decoction kettles and lauter tuns Fermentation tanks Storage tanks Filter plates Filling and packaging equipment Cleaning of hoses and any heat exchangers Instructions for use MANUAL CLEANING OF SURFACES Suitable for cleaning after each use. Recommended dosage: 5 to 10 g/l depending on the degree of pollution. In CIP systems: 10 g/l. 1. dissolve the product thoroughly in water (approx. 45 °C to 60 °C) 2. moisten the surface to be cleaned with the prepared solution and allow to act for 30 minutes 3 Rinse with warm water afterwards. 4. carry out final disinfection of the surface as usual Remarks: - Avoid prolonged contact of the agent with light metals (aluminium, iron, copper). - Over time, the color and odor of the solution may change due to the degradable components. This has no effect on the quality

Show More