This page is fully or partially automatically translated.
Key Facts
- FILLING
- ISOBARIC
- PET
Categories
- 02.2 Machinery and installations for water treatment
- 02.3 Machinery and installations for beer production
- 05.1 Process automation, control and control systems
Key Facts
- FILLING
- ISOBARIC
- PET
Categories
- 02.2 Machinery and installations for water treatment
- 02.3 Machinery and installations for beer production
- 05.1 Process automation, control and control systems
Product Description
WORKING PRINCIPLE:
The TECNA ISO-P is the electro-pneumatic filling solution suitable for the filling of carbonated and non carbonated beverages, as well as for the hot filling of beverages into PET bottles using a NECK HANDLING bottles distribution into the filling machine. The machine is equipped with 1 mt of air conveyor that is connected to Neck handling inlet starThe bottle coming from Air conveyor is lifted onto the filling valve using a pneumatic lifter equipped with neck-handling device. Single CO2 empty bottle rinsing, can be performed according to filling recipes selected on the touch-screen by operator. After bottle pressurization the filling valve will open and the product flows along the bottle wall, thus allowing gentle and no foam filling. The inflowing product displaces the gas in the bottle, which is returned to the filling tank through the vent tube. When the level in the bottle comes to close the vent tube the filling will stop and the filling valve will close again. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be multiple stages) and than the container leaves the filling machine.
APPLICATIONS:
Filling of carbonated beverages (CSD, Carbonated Water, Beer or RTD) in PET bottles.
OUTPUT RANGE:
Filler from 20 to 70 valves, depending on the product to be bottled, this system can fill from 2.000 up to 30.000 bottles per hour. Show More
The TECNA ISO-P is the electro-pneumatic filling solution suitable for the filling of carbonated and non carbonated beverages, as well as for the hot filling of beverages into PET bottles using a NECK HANDLING bottles distribution into the filling machine. The machine is equipped with 1 mt of air conveyor that is connected to Neck handling inlet starThe bottle coming from Air conveyor is lifted onto the filling valve using a pneumatic lifter equipped with neck-handling device. Single CO2 empty bottle rinsing, can be performed according to filling recipes selected on the touch-screen by operator. After bottle pressurization the filling valve will open and the product flows along the bottle wall, thus allowing gentle and no foam filling. The inflowing product displaces the gas in the bottle, which is returned to the filling tank through the vent tube. When the level in the bottle comes to close the vent tube the filling will stop and the filling valve will close again. After a settling phase, the snifting valve reduces the pressure in the bottle neck (can be multiple stages) and than the container leaves the filling machine.
APPLICATIONS:
Filling of carbonated beverages (CSD, Carbonated Water, Beer or RTD) in PET bottles.
OUTPUT RANGE:
Filler from 20 to 70 valves, depending on the product to be bottled, this system can fill from 2.000 up to 30.000 bottles per hour. Show More
Product Expert
Downloads
Make an appointment with
So that you can make an appointment, the calendar will open in a new tab on the personal profile of your contact person.
Create an onsite appointment with
So that you can make an onsite appointment, the appointment request will open in a new tab.